Item specifics

• Main

• Continuous output current 2.2 A at 4 kHz for normal duty 1.5 A at 4 kHz for heavy duty
• Degree of protection UL type 1 conforming to UL 508C
• Device short name ATV630
• Discrete input logic 16 preset speeds
• Nominal switching frequency 4 kHz
• Prospective line Isc 50 kA
• Safety function STO (safe torque off) SIL 3
• Speed drive output frequency 0.1…500 Hz
• Switching frequency 2...12 kHz adjustable 4...12 kHz with derating factor
• Synchronous motor control profile Permanent magnet motor Synchronous reluctance motor
• Type of cooling Forced convection
• Variant Standard version
• Range of product Altivar Process ATV600
• Product or component type Variable speed drive
• Product specific application Process and utilities
• Communication port protocol Modbus TCP Ethernet Modbus serial
• Supply frequency 50...60 Hz - 5...5 %
• [Us] rated supply voltage 380...480 V - 15...10 %
• Motor power hp 1 hp normal duty 0.5 hp heavy duty
• Motor power kW 0.75 kW (normal duty) 0.37 kW (heavy duty)
• EMC filter Integrated with 50 m conforming to IEC 61800-3 category C2 Integrated with 150 m conforming to IEC 61800-3 category C3
• IP degree of protection IP21 conforming to IEC 61800-5-1 IP21 conforming to IEC 60529
• Product destination Asynchronous motors Synchronous motors
• Line current 1.5 A at 380 V (normal duty) 1.3 A at 480 V (normal duty) 0.9 A at 380 V (heavy duty) 0.8 A at 480 V (heavy duty)
• Apparent power 1.1 kVA at 480 V (normal duty) 0.7 kVA at 480 V (heavy duty)
• Asynchronous motor control profile Constant torque standard Variable torque standard Optimized torque mode
• Option card Slot A: communication module, Profibus DP V1 Slot A: communication module, PROFINET Slot A: communication module, DeviceNet Slot A: communication module, Modbus TCP/EtherNet/IP Slot A: communication module, CANopen daisy chain RJ45 Slot A: communication module, CANopen SUB-D 9 Slot A: communication module, CANopen screw terminals Slot A/slot B: digital and analog I/O extension module Slot A/slot B: output relay extension module Slot A: communication module, Ethernet IP/Modbus TCP/MD-Link Communication module, BACnet MS/TP Communication module, Ethernet Powerlink

• Complementary

• Acceleration and deceleration ramps Linear adjustable separately from 0.01...9999 s
• Accuracy +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AO1, AO2 for a temperature variation 60 °C analog output
• Analogue input number 3
• Analogue input type AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits AI2 voltage analog input: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
• Analogue output number 2
• Analogue output type Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits Software-configurable current DQ-, DQ+: 30 V DC Software-configurable current DQ-, DQ+: 100 mA
• Braking to standstill By DC injection
• Connector type RJ45 (on the remote graphic terminal) for Ethernet/Modbus TCP RJ45 (on the remote graphic terminal) for Modbus serial
• Data format 8 bits, configurable odd, even or no parity
• Depth 203 mm
• Discrete input logic Positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1) Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)
• Discrete input number 8
• Discrete input type DI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
• Discrete output number 0
• Discrete output type Relay outputs R1A, R1B, R1C 250 V AC 3000 mA Relay outputs R1A, R1B, R1C 30 V DC 3000 mA Relay outputs R2A, R2C 250 V AC 5000 mA Relay outputs R2A, R2C 30 V DC 5000 mA Relay outputs R3A, R3C 250 V AC 5000 mA Relay outputs R3A, R3C 30 V DC 5000 mA
• Electrical connection Control: removable screw terminals 0.5...1.5 mm²/AWG 20...AWG 16 Motor: screw terminal 2.5...6 mm²/AWG 14...AWG 10 Line side: screw terminal 2.5...6 mm²/AWG 14...AWG 10
• enclosure mounting Wall mounted
• Exchange mode Half duplex, full duplex, autonegotiation Ethernet/Modbus TCP
• Frequency resolution Display unit: 0.1 Hz Analog input: 0.012/50 Hz
• Height 350 mm
• Input compatibility DI1...DI6: discrete input level 1 PLC conforming to IEC 61131-2 DI5, DI6: discrete input level 1 PLC conforming to IEC 65A-68 STOA, STOB: discrete input level 1 PLC conforming to IEC 61131-2
• Isolation Between power and control terminals
• Linearity error AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input AO1, AO2: +/- 0.2 % for analog output
• Local signalling 3 LEDs for local diagnostic 3 LEDs (dual colour) for embedded communication status 4 LEDs (dual colour) for communication module status 1 LED (red) for presence of voltage
• Maximum input current 1.5 A
• Maximum output frequency 500 kHz
• Maximum switching current Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
• Maximum transient current 2.4 A during 60 s (normal duty) 2.3 A during 60 s (heavy duty)
• Method of access Slave Modbus TCP
• Minimum switching current Relay output R1, R2, R3: 5 mA at 24 V DC
• Motor power range AC-3 0.55…1 kW at 380…440 V 3 phases 0.55…1 kW at 480…500 V 3 phases
• Motor slip compensation Not available in permanent magnet motor law Can be suppressed Automatic whatever the load Adjustable
• mounting mode Wall mount
• Net weight 4.5 kg
• Network number of phases 3 phases
• Number of addresses 1…247 for Modbus serial
• Output voltage <= power supply voltage
• Permissible temporary current boost 1.1 x In during 60 s (normal duty) 1.5 x In during 60 s (heavy duty)
• Physical interface Ethernet 2-wire RS 485
• Protection type Thermal protection: motor Safe torque off: motor Motor phase break: motor Thermal protection: drive Safe torque off: drive Overheating: drive Overcurrent between output phases and earth: drive Overload of output voltage: drive Short-circuit protection: drive Motor phase break: drive Overvoltages on the DC bus: drive Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overspeed: drive Break on the control circuit: drive
• Quantity per set 1
• Refresh time Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
• Relay output number 3
• Relay output type Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
• Sampling duration 2 ms +/- 0.5 ms (DI1...DI4) - discrete input 5 ms +/- 1 ms (DI5, DI6) - discrete input 5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input 10 ms +/- 1 ms (AO1) - analog output
• Supply External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection Internal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection
• Transmission frame RTU
• Transmission rate 10, 100 Mbits 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps
• Type of polarization No impedance
• Variable speed drive application selection Building - HVAC compressor centrifugal Food and beverage processing other application Mining mineral and metal fan Mining mineral and metal pump Oil and gas fan Water and waste water other application Building - HVAC screw compressor Food and beverage processing pump Food and beverage processing fan Food and beverage processing atomization Oil and gas electro submersible pump (ESP) Oil and gas water injection pump Oil and gas jet fuel pump Oil and gas compressor for refinery Water and waste water centrifuge pump Water and waste water positive displacement pump Water and waste water electro submersible pump (ESP) Water and waste water screw pump Water and waste water lobe compressor Water and waste water screw compressor Water and waste water compressor centrifugal Water and waste water fan Water and waste water conveyor Water and waste water mixer
• Width 144 mm

• Environment

• Ambient air temperature for operation -15…50 °C (without derating) 50…60 °C (with derating factor)
• Ambient air temperature for storage -40…70 °C
• Electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
• Insulation resistance > 1 MOhm 500 V DC for 1 minute to earth
• marking CE
• Maximum THDI <48 % full load conforming to IEC 61000-3-12
• Noise level 54.5 dB
• Operating altitude <= 1000 m without derating 1000...4800 m with current derating 1 % per 100 m
• Operating position Vertical +/- 10 degree
• Overvoltage category III
• Pollution degree 2
• Power dissipation in W Natural convection: 26 W at 380 V, switching frequency 4 kHz Forced convection: 21 W at 380 V, switching frequency 4 kHz
• Product certifications TÜV ATEX zone 2/22 CSA DNV-GL UL ATEX INERIS
• Regulation loop Adjustable PID regulator
• Relative humidity 5…95 % without condensation conforming to IEC 60068-2-3
• Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
• Standards UL 508C IEC 61800-3 IEC 61800-3 environment 1 category C2 EN/IEC 61800-3 environment 2 category C3 IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1
• Vibration resistance 1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6
• Volume of cooling air 38 m3/h

• Packing Units

• Number of Units in Package 1 1
• Number of Units in Package 2 6
• Package 1 Height 31.500 cm
• Package 1 Length 40.500 cm
• Package 1 Weight 5.756 kg
• Package 1 Width 17.600 cm
• Package 2 Height 75.000 cm
• Package 2 Length 80.000 cm
• Package 2 Weight 47.536 kg
• Package 2 Width 60.000 cm
• Unit Type of Package 1 PCE
• Unit Type of Package 2 P06