Item specifics

• Main

• Range of product Altivar 12
• Product or component type Variable speed drive
• Product specific application Simple machine
• mounting mode Cabinet mount
• Communication port protocol Modbus
• Supply frequency 50/60 Hz +/- 5 %
• [Us] rated supply voltage 200...240 V - 15...10 %
• Nominal output current 1.4 A
• Motor power hp 0.25 hp
• Motor power kW 0.18 kW
• Motor power hp 0.25 hp
• EMC filter Integrated
• IP degree of protection IP20

• Complementary

• 4 quadrant operation possible False
• Acceleration and deceleration ramps U Linear from 0 to 999.9 s S
• Analogue input number 1
• Analogue output number 1
• Apparent power 0.7 kVA at 240 V (heavy duty)
• Asynchronous motor control profile Voltage/frequency ratio (V/f) Sensorless flux vector control Quadratic voltage/frequency ratio
• Base load current at high overload 1.4 A
• Brake chopper integrated False
• Braking to standstill By DC injection
• Communication service Read holding registers (03) 29 words Write single register (06) 29 words Write multiple registers (16) 27 words Read/write multiple registers (23) 4/4 words Read device identification (43)
• Connector type 1 RJ45
• Continuous output current 1.4 A at 4 kHz
• Data format 8 bits, configurable odd, even or no parity
• Depth 102.2 mm
• Discrete input number 4
• Discrete output number 2
• Frequency resolution Analog input: converter A/D, 10 bits Display unit: 0.1 Hz
• Height 143 mm
• Insulation Electrical between power and control
• Line current 3.4 A at 100 V (heavy duty) 2.8 A at 120 V (heavy duty)
• Linearity error +/- 0.3 % of maximum value for analogue input
• Maximum input current 2.8 A
• Maximum output frequency 4 kHz
• Maximum output voltage 240 V
• Maximum transient current 2.1 A during 60 s (heavy duty) 2.3 A during 2 s (heavy duty)
• Method of access Server Modbus serial
• Motor slip compensation Preset in factory Adjustable
• Net weight 0.7 kg
• network frequency 50...60 Hz
• Nominal switching frequency 4 kHz
• Number of addresses 1…247
• Physical interface 2-wire RS 485
• Power dissipation in W Natural: 18.0 W
• Prospective line Isc 1 kA
• Protection type Line supply overvoltage Line supply undervoltage Overcurrent between output phases and earth Overheating protection Short-circuit between motor phases Against input phase loss in three-phase Thermal motor protection via the drive by continuous calculation of I²t
• Quantity per set Set of 1
• Relative symmetric network frequency tolerance 5 %
• Relay output number 1
• Sampling duration 20 ms, tolerance +/- 1 ms for logic input 10 ms for analogue input
• Speed drive output frequency 0.5…400 Hz
• Speed range 1…20
• Switching frequency 2...16 kHz adjustable 4...16 kHz with derating factor
• Tightening torque 0.8 N.m
• Time constant 20 ms +/- 1 ms for reference change
• Transient overtorque 150…170 % of nominal motor torque depending on drive rating and type of motor
• Transmission frame RTU
• Transmission rate 9.6 kbit/s 19.2 kbit/s 38.4 kbit/s
• Type of polarization No impedance
• Width 72 mm
• With safety function Safe brake management (SBC/SBT) False
• With safety function Safe Direction (SDI) False
• With safety function Safe Operating Stop (SOS) False
• With safety function Safe Position (SP) False
• With safety function Safe programmable logic False
• With safety function Safe Speed Monitor (SSM) False
• With safety function Safe Stop 1 (SS1) False
• With safety function Safe torque off (STO) False
• With safety function Safely Limited Position (SLP) False
• With safety function Safely Limited Speed (SLS) False
• With sft fct Safe Stop 2 (SS2) False

• Environment

• Ambient air temperature for operation -10…40 °C without derating 40…60 °C with current derating 2.2 % per °C
• Ambient air temperature for storage -25…70 °C
• Ambient air transport temperature -25…70 °C
• Assembly style On base plate
• Electromagnetic compatibility Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Immunity to conducted disturbances level 3 conforming to IEC 61000-4-6 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Surge immunity test level 3 conforming to IEC 61000-4-5 Voltage dips and interruptions immunity test conforming to IEC 61000-4-11
• Electromagnetic emission Radiated emissions environment 1 category C2 conforming to IEC 61800-3 2...16 kHz shielded motor cable Conducted emissions with integrated EMC filter environment 1 category C1 conforming to IEC 61800-3 2, 4, 8, 12 and 16 kHz shielded motor cable <5 m Conducted emissions with integrated EMC filter environment 1 category C2 conforming to IEC 61800-3 2...12 kHz shielded motor cable <5 m Conducted emissions with integrated EMC filter environment 1 category C2 conforming to IEC 61800-3 2, 4 and 16 kHz shielded motor cable <10 m Conducted emissions with additional EMC filter environment 1 category C1 conforming to IEC 61800-3 4...12 kHz shielded motor cable <20 m Conducted emissions with additional EMC filter environment 1 category C2 conforming to IEC 61800-3 4...12 kHz shielded motor cable <50 m Conducted emissions with additional EMC filter environment 2 category C3 conforming to IEC 61800-3 4...12 kHz shielded motor cable <50 m
• Environmental class (during operation) Class 3C3 according to IEC 60721-3-3 Class 3S2 according to IEC 60721-3-3
• marking CE
• Maximum acceleration under shock impact (during operation) 150 m/s² at 11 ms
• Maximum acceleration under vibrational stress (during operation) 10 m/s² at 13...200 Hz
• Maximum deflection under vibratory load (during operation) 1.5 mm at 2...13 Hz
• Noise level 0 dB
• Operating altitude > 1000...2000 m with current derating 1 % per 100 m <= 1000 m without derating
• Operating position Vertical +/- 10 degree
• Overvoltage category Class III
• Pollution degree 2
• Product certifications NOM CSA C-Tick UL GOST RCM KC
• Regulation loop Adjustable PID regulator
• Relative humidity 5…95 % without condensation conforming to IEC 60068-2-3 5…95 % without dripping water conforming to IEC 60068-2-3
• Shock resistance 15 gn conforming to IEC 60068-2-27 for 11 ms
• Standards UL 508C UL 618000-5-1 IEC 61800-5-1 IEC 61800-3
• Vibration resistance 1 gn (f = 13…200 Hz) conforming to IEC 60068-2-6 1.5 mm peak to peak (f = 3…13 Hz) - drive unmounted on symmetrical DIN rail - conforming to IEC 60068-2-6

• Packing Units

• Number of Units in Package 1 1
• Number of Units in Package 2 45
• Package 1 Height 11.500 cm
• Package 1 Length 19.500 cm
• Package 1 Weight 887.000 g
• Package 1 Width 18.600 cm
• Package 2 Height 75.000 cm
• Package 2 Length 80.000 cm
• Package 2 Weight 52.780 kg
• Package 2 Width 60.000 cm
• Unit Type of Package 1 PCE
• Unit Type of Package 2 S06

• Contractual warranty

• Warranty 18 months