Item specifics

• Main

• Continuous output current 2.2 A at 4 kHz for normal duty 1.5 A at 4 kHz for heavy duty
• Device short name ATV610
• Nominal switching frequency 4 kHz
• number of preset speeds 16 preset speeds
• Output frequency 0.1…500 Hz
• Prospective line Isc 5 kA
• Switching frequency 2...12 kHz adjustable
• Type of cooling Forced convection
• Variant Standard version
• Range of product Easy Altivar 610
• Product or component type Variable speed drive
• Product specific application Fan, pump, compressor, conveyor
• mounting mode Cabinet mount
• Communication port protocol Modbus serial
• Supply frequency 50...60 Hz +/-5 %
• [Us] rated supply voltage 380...460 V - 15...10 %
• Motor power hp 1 hp for normal duty 0.5 hp for heavy duty
• Motor power kW 0.75 kW for normal duty 0.37 kW for heavy duty
• EMC filter Integrated conforming to IEC 61800-3 category C3 with 50 m
• IP degree of protection IP20
• Product destination Asynchronous motors Synchronous motors
• Network number of phases 3 phases
• Line current 3.1 A at 380 V (normal duty) 2.6 A at 460 V (normal duty) 1.7 A at 380 V (heavy duty) 1.4 A at 460 V (heavy duty)
• Apparent power 2.1 kVA at 460 V (normal duty) 1.1 kVA at 460 V (heavy duty)
• Maximum transient current 2.4 A during 60 s (normal duty) 2.3 A during 60 s (heavy duty)
• Asynchronous motor control profile Constant torque standard Optimized torque mode Variable torque standard
• Option card Slot A: communication card, Profibus DP V1 Slot A: digital or analog I/O extension card Slot A: relay output card

• Complementary

• Acceleration and deceleration ramps S, U or customized Linear adjustable separately from 0.01 to 9000 s
• Accuracy +/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input +/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output
• Analogue input number 3
• Analogue input type AI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 30 kOhm, resolution 12 bits AI1, AI2, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits AI2, AI3 software-configurable temperature probe or water level sensor
• Analogue output number 2
• Analogue output type Software-configurable current AQ1, AQ2: 0...20 mA, resolution 10 bits Software-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bits
• Braking to standstill By DC injection
• Connector type 1 RJ45 (on the remote graphic terminal) for Modbus serial
• Depth 203 mm
• Discrete input logic Positive logic (source): DI1...DI6 configurable logic input, < 5 V (state 0), > 11 V (state 1) Negative logic (sink): DI1...DI6 configurable logic input, > 16 V (state 0), < 10 V (state 1) Positive logic (source): DI5, DI6 configurable pulse input, < 0.6 V (state 0), > 2.5 V (state 1)
• Discrete input number 6
• Discrete input type DI1...DI6 programmable as logic input, 24 V DC (<= 30 V), impedance: 3.5 kOhm DI5, DI6 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)
• Electrical connection Control, screw terminal: 0.5...1.5 mm² Line side, screw terminal: 2.5...16 mm² Motor, screw terminal: 2.5...16 mm²
• Frequency resolution Display unit: 0.1 Hz Analog input: 0.012/50 Hz
• Height 297 mm 350 mm with EMC plate
• Input compatibility DI1...DI6: logic input level 1 PLC conforming to IEC 61131-2 DI5, DI6: pulse input level 1 PLC conforming to IEC 65A-68
• Insulation resistance > 1 MOhm 500 V DC for 1 minute to earth
• Isolation Between power and control terminals
• Linearity error AI1, AI2, AI3: +/- 0.15 % of maximum value for analog input AQ1, AQ2: +/- 0.2 % for analog output
• Local signalling 2 LEDs for local diagnostic 1 LED (yellow) for embedded communication status 2 LEDs (dual colour) for communication module status 1 LED (red) for presence of voltage
• Maximum switching current Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 250 V AC Relay output R1, R2, R3 on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1, R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
• Method of access Slave
• Minimum switching current Relay output R1, R2, R3: 5 mA at 24 V DC
• Motor slip compensation Not available in permanent magnet motor law Adjustable Automatic whatever the load Can be suppressed
• Net weight 3.135 kg
• Number of addresses 1…247 for Modbus serial
• Output voltage <= power supply voltage
• Physical interface 2-wire RS 485 for Modbus serial
• Protection type Thermal protection: motor Motor phase break: motor Thermal protection: drive Overheating: drive Overcurrent between output phases and earth: drive Overload of output voltage: drive Short-circuit protection: drive Motor phase break: drive Overvoltages on the DC bus: drive Line supply overvoltage: drive Line supply undervoltage: drive Line supply phase loss: drive Overspeed: drive Break on the control circuit: drive
• Refresh time Relay output (R1, R2, R3): 5 ms (+/- 0.5 ms)
• Relay output number 3
• Relay output type Configurable relay logic R1: fault relay NO/NC electrical durability 100000 cycles Configurable relay logic R2: sequence relay NO electrical durability 100000 cycles Configurable relay logic R3: sequence relay NO electrical durability 100000 cycles
• Sampling duration 5 ms +/- 0.1 ms (AI1, AI2, AI3) - analog input 2 ms +/- 0.5 ms (DI1...DI6)configurable - discrete input 5 ms +/- 1 ms (DI5, DI6)configurable - pulse input 10 ms +/- 1 ms (AQ1, AQ2) - analog output
• Supply External supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protection Internal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protection
• Transmission frame RTU for Modbus serial
• Transmission rate 4.8, 9.6, 19.2, 38.4 kbit/s for Modbus serial
• Type of polarization No impedance for Modbus serial
• Width 145 mm

• Environment

• Ambient air temperature for operation -15…45 °C (without derating) 45…60 °C (with derating factor)
• Electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
• Environmental characteristic Chemical pollution resistance class 3C3 conforming to IEC 60721-3-3 Dust pollution resistance class 3S3 conforming to IEC 60721-3-3
• marking CE
• Noise level 55 dB conforming to 86/188/EEC
• Operating altitude <= 1000 m without derating 1000...4800 m with current derating 1 % per 100 m
• Operating position Vertical +/- 10 degree
• Pollution degree 2 conforming to IEC 61800-5-1
• Power dissipation in W 19 W(forced convection) at 380 V, switching frequency 4 kHz 23 W(natural convection) at 380 V, switching frequency 4 kHz
• Relative humidity 5…95 % without condensation conforming to IEC 60068-2-3
• Shock resistance 15 gn for 11 ms conforming to IEC 60068-2-27
• Standards IEC 61800-3 Environment 2 category C3 IEC 61800-3 IEC 61800-5-1 IEC 60721-3
• Vibration resistance 1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-6 1 gn (f= 13…200 Hz) conforming to IEC 60068-2-6

• Packing Units

• Number of Units in Package 1 1
• Number of Units in Package 2 6
• Package 1 Height 19.000 cm
• Package 1 Length 40.500 cm
• Package 1 Weight 4.245 kg
• Package 1 Width 30.500 cm
• Package 2 Height 75.000 cm
• Package 2 Length 80.000 cm
• Package 2 Weight 33.470 kg
• Package 2 Width 60.000 cm
• Unit Type of Package 1 PCE
• Unit Type of Package 2 P06