Item specifics

• Main

• Type of cooling Forced convection
• Variant Standard version
• Range of product Altivar Machine ATV340
• Product or component type Variable speed drive
• Product specific application Machine
• mounting mode Cabinet mount
• Communication port protocol Modbus TCP Modbus serial EtherNet/IP
• Supply frequency 50...60 Hz +/- 5 %
• [Us] rated supply voltage 380...480 V - 15...10 %
• Nominal output current 2.2 A
• Motor power hp 1.5 hp for normal duty 1 hp for heavy duty
• Motor power kW 1.1 kW for normal duty 0.75 kW for heavy duty
• EMC filter Class C3 EMC filter integrated
• IP degree of protection IP20
• Network number of phases 3 phases
• Electrical connection Screw terminal, clamping capacity: 1.5...4 mm² for line side Screw terminal, clamping capacity: 4...6 mm² for DC bus Screw terminal, clamping capacity: 1.5...4 mm² for motor Screw terminal, clamping capacity: 0.2...2.5 mm² for control

• Complementary

• 4 quadrant operation possible True
• Acceleration and deceleration ramps S, U or customized Linear adjustable separately from 0.01...9999 s
• Analogue input number 2
• Analogue input type AI1 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bits AI1 software-configurable temperature probe or water level sensor AI1 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bits AI2 software-configurable voltage: - 10...10 V DC, impedance: 31.5 kOhm, resolution 12 bits
• Analogue output number 1
• Analogue output type Software-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bits Software-configurable current AQ1: 0...20 mA impedance 500 Ohm, resolution 10 bits
• Apparent power 2.2 kVA at 480 V (normal duty) 2.2 kVA at 480 V (heavy duty)
• Asynchronous motor control profile Constant torque standard Variable torque standard Optimized torque mode
• Base load current at high overload 2.2 A
• Base load current at low overload 2.8 A
• Brake chopper integrated True
• Braking to standstill By DC injection
• Connector type 3 RJ45
• Continuous output current 2.2 A at 4 kHz for heavy duty 2.8 A at 4 kHz for normal duty
• Data format 8 bits, configurable odd, even or no parity
• Depth 232.5 mm
• Discrete input number 5
• Discrete input type PTI programmable as pulse input: 0…30 kHz, 24 V DC (30 V) DI1...DI5 safe torque off, 24 V DC (30 V), impedance: 3.5 kOhm programmable
• Discrete output number 2.0
• Discrete output type Programmable output DQ1, DQ2 30 V DC 100 mA
• Electrical connection Line side: screw terminal 1.5...4 mm²/AWG 14...AWG 12 DC bus: screw terminal 4...6 mm²/AWG 12...AWG 10 Motor: screw terminal 1.5...4 mm²/AWG 14...AWG 12 Control: screw terminal 0.2...2.5 mm²/AWG 24...AWG 12
• Height 270.0 mm
• Isolation Between power and control terminals
• Line current 2.6 A at 480 V without line choke (heavy duty) 2.6 A at 380 V with external line choke (normal duty) 2.1 A at 480 V with external line choke (normal duty) 1.9 A at 380 V with external line choke (heavy duty) 1.6 A at 480 V with external line choke (heavy duty) 3.4 A at 380 V without line choke (heavy duty)
• Maximum input current 3.4 A
• Maximum output frequency 0.599 kHz
• Maximum output voltage 480 V
• Maximum switching current Relay output R1C on resistive load, cos phi = 1: 3 A at 250 V AC Relay output R1C on resistive load, cos phi = 1: 3 A at 30 V DC Relay output R1C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R1C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC Relay output R2C on resistive load, cos phi = 1: 5 A at 250 V AC Relay output R2C on resistive load, cos phi = 1: 5 A at 30 V DC Relay output R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V AC Relay output R2C on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC
• Maximum transient current 3.1 A during 60 s (normal duty) 3.3 A during 60 s (heavy duty) 3.8 A during 2 s (normal duty) 4 A during 2 s (heavy duty)
• Method of access Slave Modbus RTU Slave Modbus TCP
• Minimum switching current Relay output R1B: 5 mA at 24 V DC Relay output R2C: 5 mA at 24 V DC
• Motor slip compensation Automatic whatever the load Adjustable Not available in permanent magnet motor law Can be suppressed
• Net weight 1.7 kg
• Nominal switching frequency 4 kHz
• Number of addresses 1…247
• number of preset speeds 16 preset speeds
• Output voltage <= power supply voltage
• Physical interface 2-wire RS 485
• Pollution degree 2 conforming to IEC 61800-5-1
• Power dissipation in W Natural convection: 28 W at 380 V, switching frequency 4 kHz (heavy duty) Forced convection: 28 W at 380 V, switching frequency 4 kHz (heavy duty) Natural convection: 33 W at 380 V, switching frequency 4 kHz (normal duty) Forced convection: 33 W at 380 V, switching frequency 4 kHz (normal duty)
• Prospective line Isc 5 kA
• Protection type Thermal protection: motor Safe torque off: motor Motor phase loss: motor Thermal protection: drive Safe torque off: drive Overheating: drive Overcurrent: drive Output overcurrent between motor phase and earth: drive Output overcurrent between motor phases: drive Short-circuit between motor phase and earth: drive Short-circuit between motor phases: drive Motor phase loss: drive DC Bus overvoltage: drive Line supply overvoltage: drive Line supply undervoltage: drive Input supply loss: drive Exceeding limit speed: drive Break on the control circuit: drive
• Relay output number 2
• Relay output type Relay outputs R1A Relay outputs R1C electrical durability 100000 cycles Relay outputs R2A Relay outputs R2C electrical durability 100000 cycles
• Switching frequency 2...16 kHz adjustable 14...16 kHz with derating factor
• Synchronous motor control profile Reluctance motor Permanent magnet motor
• Transmission frame RTU
• Transmission rate 4.8 kbit/s 9.6 kbit/s 19.2 kbit/s 38.4 kbit/s
• Type of polarization No impedance
• Width 85.0 mm
• With safety function Safe brake management (SBC/SBT) True
• With safety function Safe Direction (SDI) False
• With safety function Safe Operating Stop (SOS) False
• With safety function Safe Position (SP) False
• With safety function Safe programmable logic False
• With safety function Safe Speed Monitor (SSM) False
• With safety function Safe Stop 1 (SS1) True
• With safety function Safe torque off (STO) True
• With safety function Safely Limited Position (SLP) False
• With safety function Safely Limited Speed (SLS) True
• With sft fct Safe Stop 2 (SS2) False

• Environment

• Ambient air temperature for operation -15…50 °C without derating (vertical position) 50…60 °C with derating factor (vertical position)
• Ambient air temperature for storage -40…70 °C
• Ambient air transport temperature -40…70 °C
• Assembly style With heat sink
• Electromagnetic compatibility Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2 Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4 1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5 Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6
• Environmental class (during operation) Class 3C3 according to IEC 60721-3-3 Class 3S3 according to IEC 60721-3-3
• marking CE
• Maximum acceleration under shock impact (during operation) 70 m/s² at 22 ms
• Maximum acceleration under vibrational stress (during operation) 5 m/s² at 9...200 Hz
• Maximum deflection under vibratory load (during operation) 1.5 mm at 2...9 Hz
• Noise level 52.7 dB
• Operating altitude <= 3000 m with current derating above 1000m
• Operating position Vertical +/- 10 degree
• Overvoltage category Class III
• Permitted relative humidity (during operation) Class 3K5 according to EN 60721-3
• Pollution degree 2
• Product certifications UL CSA TÜV EAC CTick
• Regulation loop Adjustable PID regulator
• Standards IEC 61800-3 IEC 61800-5-1 IEC 60721-3 IEC 61508 IEC 13849-1 UL 618000-5-1 UL 508C
• Volume of cooling air 18.0 m3/h

• Packing Units

• Number of Units in Package 1 1
• Number of Units in Package 2 14
• Package 1 Height 10.700 cm
• Package 1 Length 31.500 cm
• Package 1 Weight 2.485 kg
• Package 1 Width 37.500 cm
• Package 2 Height 75.000 cm
• Package 2 Length 80.000 cm
• Package 2 Weight 47.790 kg
• Package 2 Width 60.000 cm
• Unit Type of Package 1 PCE
• Unit Type of Package 2 P06