Item specifics

• Main

• Factory setting current 285 A
• IcL starter rating 320 A connection in the motor supply line for standard applications
• Phase 3 phase
• Type of start Start with torque control (current limited to 3.5 In)
• Utilisation category AC-53A
• Range of product Altistart 22
• Product or component type Soft starter
• Product specific application Pumps and fans
• [Us] rated supply voltage 230...440 V - 15...10 %
• Motor power kW 160 kW 400 V 160 kW 440 V 90 kW 230 V
• IP degree of protection IP00
• Product destination Asynchronous motors
• Component name ATS22
• Power dissipation in W 150 W for standard applications

• Complementary

• Assembly style With heat sink
• Communication data link Serial
• Communication port protocol Modbus
• Connector type 1 RJ45
• Control circuit consumption 20 W
• Depth 11.8 in (299 mm)
• Device connection To the motor delta terminals In the motor supply line
• Discrete input logic Positive logic LI1, LI2, LI3 < 5 V <= 2 mA > 11 V, >= 5 mA
• Discrete input number 3
• Discrete input type LI1, LI2, LI3) logic, 5 mA 4.3 kOhm
• Discrete input voltage 24 V <= 30 V
• Discrete output number 2
• Discrete output type Relay outputs R1 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O Relay outputs R2 230 V running, alarm, trip, stopped, not stopped, starting, ready C/O
• Function Available Internal bypass
• Height 16.7 in (425 mm)
• Installed device 31
• marking CE
• Maximum switching current 5 A 250 V AC resistive 1 relay outputs 5 A 30 V DC resistive 1 relay outputs 2 A 250 V AC inductive 0.4 20 ms relay outputs 2 A 30 V DC inductive 7 ms relay outputs
• Minimum switching current 100 mA 12 V DC relay outputs)
• Motor power range AC-3 55…100 kW 200…240 V 3 phase 110…220 kW 380…440 V 3 phase
• Motor starter type Soft starter
• Net weight 72.8 lb(US) (33 kg)
• network frequency 45...66 Hz
• Operating position Vertical +/- 10 degree
• Output current 0.4...1 Icl adjustable
• Physical interface RS485 multidrop
• Protection type Phase failure line Thermal protection motor Thermal protection starter
• PTC probe input 750 Ohm
• Supply frequency 50...60 Hz - 10...10 %
• Supply voltage limits 195…484 V
• Transmission rate 4800, 9600 or 19200 bps
• Type of cooling Forced convection
• Width 8.1 in (206 mm)
• [Uc] control circuit voltage 230 V - 15...10 % 50/60 Hz

• Environment

• Ambient air temperature for operation 14…104 °F (-10…40 °C) without derating) 104…140 °F (40…60 °C) with current derating 2.2 % per °C)
• Ambient air temperature for storage -13…158 °F (-25…70 °C)
• Electromagnetic compatibility Conducted and radiated emissions level A IEC 60947-4-2 Damped oscillating waves level 3 IEC 61000-4-12 Electrostatic discharge level 3 IEC 61000-4-2 Immunity to electrical transients level 4 IEC 61000-4-4 Immunity to radiated radio-electrical interference level 3 IEC 61000-4-3 Voltage/current impulse level 3 IEC 61000-4-5
• Noise level 56 dB
• Operating altitude <= 3280.84 ft (1000 m) without derating > 3280.84...< 6561.68 ft (> 1000...< 2000 m) with current derating of 2.2 % per additional 100 m
• Pollution degree Level 2 IEC 60664-1
• Product certifications UL CCC C-tick CSA GOST
• Relative humidity 0…95 % without condensation or dripping water IEC 60068-2-3
• Shock resistance 15 gn 11 ms IEC 60068-2-27
• Standards IEC 60947-4-2
• Vibration resistance 1 gn 13…200 Hz)IEC 60068-2-6 1.5 mm 2…13 Hz)IEC 60068-2-6

• Packing Units

• Number of Units in Package 1 1
• Package 1 Height 19.3 in (49.0 cm)
• Package 1 Length 21.5 in (54.5 cm)
• Package 1 Weight 54.01 lb(US) (24.5 kg)
• Package 1 Width 14.4 in (36.5 cm)
• Unit Type of Package 1 PCE

• Contractual warranty

• Warranty 18 months

• Ordering and shipping details

• Category US1CP1G22576
• Country of origin ID
• Discount Schedule CP1G
• GTIN 3606480211270
• Returnability No