Item specifics

• Main

• Device short name LXM26D
• Format of the drive Compact housing
• Range of product Easy Lexium 26
• Product or component type Motion servo drive
• Line current 6 A 181.8 % at 220 V, single phase 6 A 160.6 % at 220 V, three phase

• Complementary

• Absolute accuracy error 0.1 %
• Analogue input number 2
• Analogue input type V_REF voltage analog input: - 10...10 V, impedance: 10 kOhm, resolution: 12 bits T_REF voltage analog input
• Continuous output current 4.5 A at 16 kHz
• Continuous power 750 W at 220 V
• Control signal type Servo motor encoder feedback CN2
• Depth 146 mm
• Discrete input logic Positive or negative (CN1)
• Discrete input number 8 programmable (CN1) 1 pulse train input (PTI) (CN1) 2 fast capture (CN1)
• Discrete input voltage 24 V DC for logic
• Discrete output logic Positive or negative (CN1)
• Discrete output number 1 5
• Discrete output type Logic (CN1) at 12...24 V DC Pulse train output (PTO) (CN1)
• Discrete output voltage 12...24 V DC
• Electrical connection Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (L1-L2) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (R, S, T) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (U, V, W, PE) Spring terminal, clamping capacity: 0.82...1 mm², AWG 18 (PA/+, PBe)
• Electrical isolation Between power and control
• Height 150 mm
• marking CULus CE CSA
• Maximum leakage current 1.3 mA
• Net weight 1 kg
• network frequency 47.5...63 Hz
• Network number of phases Three phase Single phase
• Nominal power 0.75 kW at 220 V 16 kHz
• Operating position Vertical
• Output current 3s peak 13.5 A at 220 V
• Output voltage <= power supply voltage
• Overvoltage category III
• Physical interface RS485 for Modbus Serial line slave
• Product compatibility Servo motor BCH2 (130 mm, 1 motor stacks) Servo motor BCH2 (80 mm, 2 motor stacks)
• Protection type Against reverse polarity: inputs signal Against short-circuits: outputs signal Overcurrent: motor Overvoltage: motor Undervoltage: motor Overheating: motor Overload: motor Overspeed: motor
• Signalling function Servo status and fault codes five 7-segment display units
• Status LED 1 LED (red) charge
• Supply frequency 50/60 Hz - 5...5 %
• Supply voltage limits 200…255 V three phase 170…255 V single phase
• Switching frequency 16 kHz
• Tightening torque PE (ground): 1.4 N.m
• Type of cable Twisted shielded pairs cable (single or double) (temperature: 0…55 °C)
• Type of cooling Integrated fan
• Width 55 mm
• [Us] rated supply voltage 220 V (- 10...15 %) for three phase 220 V (- 20...15 %) for single phase

• Environment

• Ambient air temperature for operation 0…55 °C
• Ambient air temperature for storage -25…65 °C
• Electromagnetic compatibility Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
• EMC filter Without EMC filter
• IP degree of protection IP20
• Operating altitude <= 1000 m without derating > 1000...2000 m 1 % per 100 m
• Product certifications cULus CSA CE
• Relative humidity 5…95 % without condensation
• Shock resistance 10 gn, type I conforming to IEC 60068-2-27
• Standards IEC 61800-5-1
• Vibration resistance 3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3

• Packing Units

• Number of Units in Package 1 1
• Number of Units in Package 2 5
• Package 1 Height 7.56 cm
• Package 1 Length 23.647 cm
• Package 1 Weight 1.3 kg
• Package 1 Width 22.879 cm
• Package 2 Height 30.0 cm
• Package 2 Length 39.8 cm
• Package 2 Weight 7.131 kg
• Package 2 Width 29.9 cm
• Unit Type of Package 1 PCE
• Unit Type of Package 2 S03