motion servo drive, Lexium 28, single and three phase, 200 to 240V, 200W

motion servo drive, Lexium 28, single and three phase, 200 to 240V, 200W

0 reviews 0 sold. Only 1 remain
0.00ريال
Product Code: LXM28AU02M3X
Availability: In Stock
Viewed 610 times

Product Description

This product is part of the Lexium 28 range, an offer of servo drives from 0.05kW to 4.5kW. The motion servo drive features EMC filter, integrated CANopen, CAN motion interface 7-segment display with 5 buttons. It is a motion servo drive with a rated supply voltage of 220V (single and three phase), an output current of 4.5A, nominal power of 0.2kW and continuous power of 200W. It is furnished with spring terminal for electrical connection and RJ45 connectors (CN4) for CANopen/CAN motion. There is an electrical isolation between power/control. It offers CANopen and CAN motion communication interfaces and physical interface of RS485 for Modbus Serial line slave. It is an IP20 rated product. Its dimensions are 55mm (width) x 146mm (depth) x 150mm (height). It weighs 1kg. It is suitable for machine control solutions. This product is certified by CE, CSA and CULus. It meets EN/IEC 61800-5-1 standards. This product is compatible with servo motor BCH2 (60mm, 1 motor stack) at 200W. The Lexium 28 range offers predeterminate combinations to suit the requirements of motion control applications and optimize the performance of the installation. Lexium 28 servo drives and Lexium BCH2 servo motors, optimized servo bundles for compact machines.

Item specifics

  • Main

  • Device short name LXM28A
  • Format of the drive Compact housing
  • Range of product Lexium 28
  • Product or component type Motion servo drive
  • Line current 2.4 A 226.8 % 220 V, single phase 2.4 A 200.7 % 220 V, three phase
  • Complementary

  • Absolute accuracy error 0.1 %
  • Analogue input number 2
  • Analogue input type V_REF voltage analog input - 10...10 V 10 kOhm 14 bits T_REF voltage analog input
  • Communication interface CANopen, Integrated CANmotion, Integrated
  • Connector type RJ45 CN4)CANopen, CANmotion
  • Continuous output current 1.5 A 16 kHz
  • Continuous power 200 W 220 V
  • Control signal type Servo motor encoder feedback CN2
  • Depth 5.7 in (146 mm)
  • Discrete input logic Positive or negative CN1)
  • Discrete input number 8 programmable CN1) 1 pulse train input (PTI) CN1) 2 fast capture CN1) 1 safety function STO CN9)
  • Discrete input voltage 24 V DC logic
  • Discrete output logic Positive or negative CN1)
  • Discrete output number 5 logic output CN1)12...24 V DC 1 pulse train output (PTO) CN1)
  • Discrete output voltage 12...24 V DC
  • Electrical connection Spring terminal 0.82...1 mm², AWG 18 L1-L2) Spring terminal 0.82...1 mm², AWG 18 R, S, T) Spring terminal 0.82...1 mm², AWG 18 U, V, W, PE) Spring terminal 0.82...1 mm², AWG 18 PA/+, PBe)
  • Electrical isolation Between power and control
  • EMC filter Without EMC filter
  • Height 5.9 in (150 mm)
  • marking CSA CULus CE
  • Maximum leakage current 1.3 mA
  • Method of access Slave
  • Net weight 2.2 lb(US) (1 kg)
  • network frequency 47.5...63 Hz
  • Nominal power 0.2 kW 220 V 16 kHz
  • Number of addresses 1…127 CANopen, CANmotion
  • Operating position Vertical
  • Output current 3s peak 4.5 A 220 V
  • Output current 3s peak 2 4.5 A 220 V
  • Output current 3s peak 3 4.5 A 220 V
  • Output voltage <= power supply voltage
  • Overvoltage category III
  • Phase Three phase Single phase
  • Physical interface RS485 Modbus Serial line slave
  • Product compatibility Servo motor BCH2 2.4 in (60 mm), 1 200 W
  • Protection type Against reverse polarity inputs signal Against short-circuits outputs signal Overcurrent motor Overvoltage motor Undervoltage motor Overheating motor Overload motor Overspeed motor
  • Safety function STO (safe torque off), Integrated
  • Safety level SIL 2 IEC 61800-5-2 2007 SIL 2 IEC 61508-1 2010 PL d/category 3 ISO 13849-1 2008 SIL 2 ISO 13849-1 2009/AC SIL 2 IEC 60204-1 2006 SIL 2 IEC 60204-1 2009/A1 SIL 2 IEC 60204-1 2010/AC SIL 2 IEC 62061 2012
  • Signalling function Servo status and fault codes five 7-segment display units
  • Status LED 1 LED (Red) charge 1 LED (Green) RUN 1 LED (Red) error
  • Supply frequency 50/60 Hz - 5...5 %
  • Supply voltage limits 200…255 V three phase 170…255 V single phase
  • Switching frequency 16 kHz
  • Transmission rate 250 kbit/s 328.08…820.2 ft (100…250 m) CANopen, CANmotion 500 kbit/s 13.1…328.08 ft (4…100 m) CANopen, CANmotion 1 Mbit/s 13.1 ft (4 m) CANopen, CANmotion
  • Type of cable Shielded motor cable 32…131 °F (0…55 °C)) copper
  • Type of cooling Natural convection
  • Width 2.2 in (55 mm)
  • [Us] rated supply voltage 200...240 V - 10...15 %)three phase 200...240 V - 20...15 %)single phase
  • Environment

  • Ambient air temperature for operation 32…131 °F (0…55 °C)
  • Ambient air temperature for storage -13…149 °F (-25…65 °C)
  • Electromagnetic compatibility Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
  • IP degree of protection IP20
  • Operating altitude <= 3280.84 ft (1000 m) without derating > 3280.84...6561.68 ft (> 1000...2000 m) 1 % per 100 m
  • Product certifications cULus CSA CE
  • Relative humidity 5…95 % without condensation
  • Shock resistance 10 gn, type I IEC 60721-3-3
  • Standards IEC 61800-5-1
  • Vibration resistance 3M4 3 mm 9…200 Hz)IEC 60721-3-3
  • Packing Units

  • Number of Units in Package 1 1
  • Number of Units in Package 2 5
  • Number of Units in Package 3 40
  • Package 1 Height 3.0 in (7.5 cm)
  • Package 1 Length 9.3 in (23.7 cm)
  • Package 1 Weight 2.78 lb(US) (1.26 kg)
  • Package 1 Width 9.06 in (23 cm)
  • Package 2 Height 11.8 in (30 cm)
  • Package 2 Length 15.7 in (39.8 cm)
  • Package 2 Weight 15.19 lb(US) (6.89 kg)
  • Package 2 Width 11.8 in (29.9 cm)
  • Package 3 Height 23.6 in (60 cm)
  • Package 3 Length 31.5 in (80 cm)
  • Package 3 Weight 121.52 lb(US) (55.12 kg)
  • Package 3 Width 23.6 in (60 cm)
  • Unit Type of Package 1 PCE
  • Unit Type of Package 2 S03
  • Unit Type of Package 3 PAL
  • Ordering and shipping details

  • Category US1PC5118262
  • Country of origin CN
  • Discount Schedule PC51
  • GTIN 3606480711770
  • Returnability Yes

Write a review

Note: HTML is not translated!
    Bad           Good
motion servo drive, Lexium 28, single and three phase, 200 to 240V, 200W

motion servo drive, Lexium 28, single and three phase, 200 to 240V, 200W

0.00ريال