motion servo drive, Easy Lexium 16, single phase 200...240V 0.75kW, no EMC filter

motion servo drive, Easy Lexium 16, single phase 200...240V 0.75kW, no EMC filter

0 reviews 0 sold. Only 1 remain
0.00ريال
Product Code: LXM16DU07M2X
Availability: In Stock
Viewed 849 times

Product Description

Item specifics

  • Main

  • Device short name LXM16D
  • Format of the drive Compact housing
  • Range of product Easy Lexium 16
  • Product or component type Motion servo drive
  • [Us] rated supply voltage 220 V (- 15...10 %) for single phase
  • Network number of phases Single phase
  • Line current 7.9 A 166.7 % at 220 V, single phase
  • Complementary

  • Continuous output current 5.1 A
  • Continuous power 750 W at 220 V
  • Control signal type Servo motor encoder feedback CN2
  • Depth 185.2 mm
  • Discrete input logic Positive or negative (CN1)
  • Discrete input number 6 programmable (CN1) 2 pulse train input (PTI) (CN1)
  • Discrete input voltage 24 V DC for logic
  • Discrete output logic Sink (CN1)
  • Discrete output number 3 3
  • Discrete output type Logic (CN1) at 12...24 V DC Pulse train output (PTO) (CN1)
  • Discrete output voltage 12...24 V DC
  • Electrical connection Spring terminal, clamping capacity: 0.2...2.5 mm², AWG 24...AWG 12 (L, N, P+, PB, U, V, W)
  • Electrical isolation Between power and control
  • Height 150 mm
  • marking CE
  • Maximum leakage current 3.5 mA
  • Net weight 1.5 kg
  • network frequency 47.5...63 Hz
  • Nominal power 0.75 kW at 220 V 8 kHz
  • Operating position Vertical
  • Output current 3s peak 20 A at 220 V
  • Output voltage <= power supply voltage
  • Overvoltage category III
  • Physical interface Mini-B USB for Modbus Serial line slave
  • Product compatibility Servo motor BCH16 (80 mm, 1 motor stacks)
  • Protection type Against reverse polarity: inputs signal Against short-circuits: outputs signal Against reverse polarity: outputs signal Overcurrent: motor and driver Overvoltage: driver Undervoltage: driver Overheating: driver Overload: motor and driver Overspeed: motor
  • Signalling function Servo status and fault codes five 7-segment display units
  • Status LED 1 LED (red) charge
  • Supply frequency 50/60 Hz - 5...5 %
  • Supply voltage limits 200…240 V single phase
  • Switching frequency 8 kHz
  • Tightening torque PE (ground): 1.4 N.m
  • Type of cable 1 shielded twisted pair (temperature: 0…40 °C)
  • Type of cooling Fan
  • Width 65 mm
  • Environment

  • Ambient air temperature for operation 0…40 °C (without derating) 40…55 °C (with derating factor)
  • Ambient air temperature for storage -40…70 °C
  • Electromagnetic compatibility Conducted emission - test level: level 3 category C3 conforming to IEC 61800-3
  • EMC filter Without EMC filter
  • IP degree of protection IP20
  • Operating altitude <= 1000 m without derating > 1000...2000 m with current derating
  • Product certifications CE
  • Relative humidity 5…95 % without condensation
  • Shock resistance 10 gn, type I conforming to IEC 60721-3-3
  • Standards IEC 61800-5-1
  • Vibration resistance 3M4 amplitude = 3 mm (f = 9…200 Hz) conforming to IEC 60721-3-3
  • Packing Units

  • Number of Units in Package 1 1
  • Number of Units in Package 2 7
  • Package 1 Height 20.5 cm
  • Package 1 Length 11 cm
  • Package 1 Weight 1.6 kg
  • Package 1 Width 24 cm
  • Package 2 Height 30 cm
  • Package 2 Length 60 cm
  • Package 2 Weight 11.96 kg
  • Package 2 Width 40 cm
  • Unit Type of Package 1 PCE
  • Unit Type of Package 2 S04

Write a review

Note: HTML is not translated!
    Bad           Good
motion servo drive, Easy Lexium 16, single phase 200...240V 0.75kW, no EMC filter

motion servo drive, Easy Lexium 16, single phase 200...240V 0.75kW, no EMC filter

0.00ريال