Item specifics

• Main

• Contacts type and composition 1 C/O
• Measurement range 208...480 V AC
• Output contacts 1 C/O
• Relay monitored parameters Undervoltage and overvoltage in window mode Asymmetry Phase sequence Phase failure detection
• Relay name RM17TE
• Relay type Multifunction control relay
• time delay Adjustable 0.1...10 s, +/- 10 % of the full scale value Tt- time delay upon fault
• [Uc] control circuit voltage 208...480 V
• Range of product Harmony Control Relays
• Product specific application For 3-phase supply
• Nominal output current 5 A

• Complementary

• Adjustment of asymmetry threshold 5...15 % of Un selected
• Connections - terminals Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
• Control circuit frequency 50...60 Hz +/- 10 %
• Control circuit voltage limits - 12 % + 10 % Un
• Control type Without test button
• delay at power up 650 ms
• Electrical durability 100000 cycles
• Housing material Self-extinguishing plastic
• Hysteresis 2 %
• Insulation resistance > 500 MOhm at 500 V DC conforming to IEC 60255-5 > 500 MOhm at 500 V DC conforming to IEC 60664-1
• Local signalling LED (green) for power ON LED (yellow) for relay ON
• Maximum measuring cycle 150 ms measurement cycle as true rms value
• Maximum switching current 5 A AC 5 A DC
• Maximum switching voltage 250 V AC 250 V DC
• Measurement error < 0.05 %/°C with temperature variation < 1 % over the whole range with voltage variation
• Measurement voltage limits 183…528 V AC
• Mechanical durability 30000000 cycles
• Minimum switching current 10 mA at 5 V DC
• Mounting support 35 mm symmetrical DIN rail conforming to IEC 60715
• Net weight 0.13 kg
• Operating position Any position without derating
• Operating rate <= 360 operations/hour full load
• Phase failure sensitivity 0.7 Un
• Power consumption in VA 0…22 VA at 400 V AC 50 Hz
• Repeat accuracy 0.5 % for input and measurement circuit 3 % for time delay
• Reset time 1500 ms time delay
• Response time < 200 ms (in the event of a fault)
• Safety reliability data MTTFd = 502.2 years B10d = 470000
• Supply frequency 50/60 Hz +/- 10 %
• Supply voltage limits 183…528 V AC
• Switching capacity in VA 1250 VA
• Threshold adjustment voltage 2...20 % of Un selected -2...-17 % in the range 220 V AC +2...+10 % in the range 480 V AC -2...-12 % in the range 208 V AC
• Tightening torque 0.6…1 N.m conforming to IEC 60947-1
• Utilisation category AC-12 conforming to IEC 60947-5-1 AC-13 conforming to IEC 60947-5-1 AC-14 conforming to IEC 60947-5-1 AC-15 conforming to IEC 60947-5-1 DC-12 conforming to IEC 60947-5-1 DC-13 conforming to IEC 60947-5-1
• Voltage range 208...480 V phase to phase
• Width 17.5 mm
• [Ui] rated insulation voltage 400 V conforming to IEC 60664-1
• [Un] rated nominal voltage , self-powered

• Environment

• Ambient air temperature for operation -20…50 °C
• Ambient air temperature for storage -40…70 °C
• Dielectric test voltage 2 kV, 1 min AC 50 Hz conforming to IEC 60255-5 2 kV, 1 min AC 50 Hz conforming to IEC 60664-1
• Directives 89/336/EEC - electromagnetic compatibility 73/23/EEC - low voltage directive
• Electromagnetic compatibility Emission standard for industrial environments conforming to IEC 61000-6-4 Emission standard for residential, commercial and light-industrial environments conforming to IEC 61000-6-3 Immunity for industrial environments conforming to IEC 61000-6-2
• IP degree of protection IP20 (terminals) conforming to IEC 60529 IP30 (casing) conforming to IEC 60529
• marking CE
• Non-dissipating shock wave 4 kV conforming to IEC 60255-5 4 kV conforming to IEC 60664-1 4 kV conforming to IEC 61000-4-5
• Overvoltage category III conforming to IEC 60664-1
• Pollution degree 3 conforming to IEC 60664-1
• Product certifications GOST C-Tick CSA UL GL
• Relative humidity 95 % at 55 °C conforming to IEC 60068-2-30
• Shock resistance 15 gn for 11 ms conforming to IEC 60255-21-1
• Standards IEC 60255-1
• Vibration resistance 0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-6 1 gn (f= 57.6…150 Hz) conforming to IEC 60255-21-1

• Packing Units

• Number of Units in Package 1 1
• Number of Units in Package 2 48
• Package 1 Height 2.7 cm
• Package 1 Length 9.6 cm
• Package 1 Weight 92.0 g
• Package 1 Width 7.7 cm
• Package 2 Height 15.0 cm
• Package 2 Length 40.0 cm
• Package 2 Weight 4.936 kg
• Package 2 Width 30.0 cm
• Unit Type of Package 1 PCE
• Unit Type of Package 2 S02

• Contractual warranty

• Warranty 18 months