Item specifics

• Main

• Discrete I/O number 16
• Discrete input current 7 mA for regular input 7 mA for fast input 9 mA for high speed input
• Discrete input number I2...I5: 4 fast input I6...I8: 3 regular input I0...I1: 2 high speed input
• Discrete input voltage 24 V
• Discrete input voltage type DC
• Discrete output current 2 A
• Discrete output number 7 relay
• Discrete output type Relay normally open
• Discrete output voltage 24 V DC 220 V AC
• Power consumption in VA 30…40 VA at 100...240 V AC (with max I/O)
• Range of product Easy Modicon M100
• Product or component type Logic controller
• [Us] rated supply voltage 100...240 V AC

• Complementary

• Communication port protocol USB port: USB - SoMachine-Network Non isolated serial link: Modbus master/slave - RTU/ASCII or SoMachine-Network
• Configurable filtering time 0 ms for input 3 ms for input 12 ms for input
• Control signal type Quadrature (x1, x2, x4) at 60 kHz for fast input (HSC mode) Pulse/direction at 60 kHz for fast input (HSC mode) Single phase at 60 kHz for fast input (HSC mode) CW/CCW at 60 kHz for fast input (HSC mode)
• Counting input number 2 fast input (HSC mode) at 60 kHz 32 bits
• Data storage equipment 32 GB micro SD card (optional)
• Depth 70 mm
• Electrical connection removable screw terminal blockfor inputs removable screw terminal blockfor outputs removable screw terminal block, 4 terminal(s) for connecting the serial link1 Mini B USB 2.0 connectorfor a programming terminal removable screw terminal block, 3 terminal(s) for connecting the 100-240 V AC power supply
• Electrical durability 100000 cycles AC-12, 240 V, 480 VA, resistive 100000 cycles DC-12, 24 V, 48 W, resistive
• Exct time for event task 60 µs response time
• Execution time for 1 KInstruction 0.3 ms for event and periodic task
• Execution time per instruction 0.2 µs Boolean
• Height 90 mm
• Input impedance 3.3 kOhm for regular input 3.3 kOhm for fast input 2.81 kOhm for high speed input
• Inrush current 50 A
• Insulation Between input and internal logic at 560 V AC Between fast input and internal logic at 560 V AC Between input groups at 560 V AC Non-insulated between inputs Between output and internal logic at 1780 V AC Between output groups at 1780 V AC Between supply and internal logic at 1780 V AC
• Integrated connection type USB port with mini B USB 2.0 connector Non isolated serial link serial 1 with terminal block connector and RS485 interface Non isolated serial link serial 2 with terminal block connector and RS232/RS485 interface
• Local signalling 1 LED (green) for PWR 1 LED (green) for RUN 1 LED (red) for module error (ERR) 1 LED (green) for SD card access (SD) 1 LED (green) for SL1 1 LED per channel (green) for I/O state
• Maximum cable distance between devices Shielded cable: <10 m for fast input Shielded cable: <10 m for high speed input Unshielded cable: <150 m for output Unshielded cable: <50 m for regular input
• Maximum current per output common 4 A at COM 0 4 A at COM 1
• Mechanical durability 20000000 cycles for relay output
• Memory capacity 1024 kB internal flash with 10000 instructions for backup of programs
• Minimum load 10 mA at 5 V DC for relay output
• Mounting support Top hat type TH35-15 rail conforming to IEC 60715 Top hat type TH35-7.5 plate or panel with fixing kit conforming to IEC 60715
• Net weight 0.31 kg
• network frequency 50/60 Hz
• Output voltage limits 30 V DC 250 V AC
• Regulation loop Adjustable PID regulator up to 14 simultaneous loops
• Response time 10 ms turn-on, Q0...Q6 terminal(s) for relay output 10 ms turn-off, Q0...Q6 terminal(s) for relay output 35 µs turn-on, I2...I5 terminal(s) for fast input 100 µs turn-off, I2...I5 terminal(s) for fast input 5 µs turn-on, I0...I1 terminal(s) for high speed input 5 µs turn-off, I0...I1 terminal(s) for high speed input 35 µs turn-on, I6...I8 terminal(s) for regular input 100 µs turn-off, I6...I8 terminal(s) for regular input
• Sensor power supply 24 V DC
• Supply voltage limits 85…264 V
• Switching frequency 0.1 Hz with maximum load 5 Hz without maximum load
• Transmission rate 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 12 Mbit/s for USB
• Voltage state 0 guaranteed <= 5 V for input
• Voltage state 1 guaranteed >= 15 V for input
• Width 110 mm

• Environment

• Ambient air temperature for operation 0…55 °C (horizontal installation)
• Ambient air temperature for storage -25…70 °C
• Electromagnetic compatibility Electrostatic discharge immunity test - test level: 8 kV (air discharge) conforming to EN/IEC 61000-4-2 Electrostatic discharge immunity test - test level: 6 kV (contact discharge) conforming to EN/IEC 61000-4-2 Susceptibility to electromagnetic fields - test level: 10 V/m (80 MHz...3 GHz) conforming to EN/IEC 61000-4-3 Conducted emission - test level: 79 dBμV/m QP/66 dBμV/m AV (power lines (AC)) conforming to EN/IEC 55011 Conducted emission - test level: 73 dBμV/m QP/60 dBμV/m AV (power lines (AC)) conforming to EN/IEC 55011 Radiated emission - test level: 40 dBμV/m QP class A (10 m) conforming to EN/IEC 55011 Radiated emission - test level: 47 dBμV/m QP class A (10 m) conforming to EN/IEC 55011 Magnetic field at power frequency - test level: 30 A/m (I/O) conforming to EN/IEC 61000-4-8 Electrical fast transient/burst immunity test - test level: 2 kV (power lines) conforming to EN/IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 2 kV (relay output) conforming to EN/IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV (I/O) conforming to EN/IEC 61000-4-4 Electrical fast transient/burst immunity test - test level: 1 kV (serial link) conforming to EN/IEC 61000-4-4 1.2/50 µs shock waves immunity test - test level: 1 kV (power lines (DC)) conforming to EN/IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 2 kV (power lines (AC)) conforming to EN/IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 2 kV (relay output) conforming to EN/IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 1 kV (I/O) conforming to EN/IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 1 kV (shielded cable) conforming to EN/IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 0.5 kV class A (power lines (DC)) conforming to EN/IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 1 kV class A (power lines (AC)) conforming to EN/IEC 61000-4-5 1.2/50 µs shock waves immunity test - test level: 1 kV (relay output) conforming to EN/IEC 61000-4-5 Conducted RF disturbances - test level: 10 V (0.15...80 MHz) conforming to EN/IEC 61000-4-6
• Immunity to microbreaks 10 ms
• IP degree of protection IP20 with protective cover in place
• Operating altitude 0...2000 m
• Pollution degree <= 2
• Product certifications CE
• Relative humidity 10…95 %, without condensation (in operation) 10…95 %, without condensation (in storage)
• Shock resistance 15 gn for 11 ms 30 gn for 6 ms
• Standards EN/IEC 61010-2-201 EN/IEC 61131-2
• Storage altitude 0…3000 m
• Vibration resistance 3.5 mm at 5…8.4 Hz on symmetrical rail 1 gn at 8.4…150 Hz on symmetrical rail 3.5 mm at 5…8.4 Hz on panel mounting 3 gn at 8.4…150 Hz on panel mounting

• Packing Units

• Number of Units in Package 1 1
• Number of Units in Package 2 18
• Number of Units in Package 3 432
• Package 1 Height 9.493 cm
• Package 1 Length 13.668 cm
• Package 1 Weight 450 g
• Package 1 Width 12.157 cm
• Package 2 Height 30 cm
• Package 2 Length 40 cm
• Package 2 Weight 8600 g
• Package 2 Width 30 cm
• Package 3 Height 95 cm
• Package 3 Length 120 cm
• Package 3 Weight 215400 g
• Package 3 Width 80 cm
• Unit Type of Package 1 PCE
• Unit Type of Package 2 S03
• Unit Type of Package 3 P12