Item specifics

• Main

• Analogue input number 2 at 0...10 V
• Discrete input number 9, discrete input conforming to IEC 61131-2 Type 1
• Discrete output current 2 A
• Discrete output number 7 relay
• Discrete output type Relay normally open
• Discrete output voltage 5...125 V DC 5...250 V AC
• Range of product Modicon M221
• Product or component type Logic controller
• [Us] rated supply voltage 100...240 V AC

• Complementary

• Absolute accuracy error +/- 1 % of full scale for analog input
• Analogue input resolution 10 bits
• Backup time 1 year at 25 °C (by interruption of power supply)
• Battery type BR2032 or CR2032X lithium non-rechargeable
• Clock drift <= 30 s/month at 25 °C
• Communication port protocol USB port: USB - SoMachine-Network Non isolated serial link: Modbus master/slave - RTU/ASCII or SoMachine-Network
• Configurable filtering time 0 ms for input 3 ms for input 12 ms for input
• Conversion time 1 ms per channel + 1 controller cycle time for analogue input analog input
• counter function Single phase Frequency meter Dual phase (quadrature) Dual phase (pulse/direction)
• Counting input number 4 fast input (HSC mode) at 100 kHz 32 bits
• Data backed up 256 kB built-in flash memory for backup of application and data
• Data storage equipment 2 GB SD card (optional)
• Depth 70 mm
• Discrete I/O number 16
• Discrete input current 7 mA for discrete input 5 mA for fast input
• Discrete input logic Sink or source (positive/negative)
• Discrete input voltage 24 V
• Discrete input voltage type DC
• Electrical connection removable screw terminal block for inputs removable screw terminal block for outputs terminal block, 3 terminal(s) for connecting the 24 V DC power supply connector, 4 terminal(s) for analogue inputs Mini B USB 2.0 connector for a programming terminal
• Electrical durability 100000 cycles AC-12, 120 V, 240 VA, resistive 100000 cycles AC-12, 240 V, 480 VA, resistive 300000 cycles AC-12, 120 V, 80 VA, resistive 300000 cycles AC-12, 240 V, 160 VA, resistive 100000 cycles AC-15, cos phi = 0.35, 120 V, 60 VA, inductive 100000 cycles AC-15, cos phi = 0.35, 240 V, 120 VA, inductive 300000 cycles AC-15, cos phi = 0.35, 120 V, 18 VA, inductive 300000 cycles AC-15, cos phi = 0.35, 240 V, 36 VA, inductive 100000 cycles AC-14, cos phi = 0.7, 120 V, 120 VA, inductive 100000 cycles AC-14, cos phi = 0.7, 240 V, 240 VA, inductive 300000 cycles AC-14, cos phi = 0.7, 120 V, 36 VA, inductive 300000 cycles AC-14, cos phi = 0.7, 240 V, 72 VA, inductive 100000 cycles DC-12, 24 V, 48 W, resistive 300000 cycles DC-12, 24 V, 16 W, resistive 100000 cycles DC-13, 24 V, 24 W, inductive (L/R = 7 ms) 300000 cycles DC-13, 24 V, 7.2 W, inductive (L/R = 7 ms)
• Exct time for event task 60 µs response time
• Execution time for 1 KInstruction 0.3 ms for event and periodic task
• Execution time per instruction 0.2 µs Boolean
• Height 90 mm
• Input impedance 3.4 kOhm for discrete input 100 kOhm for analog input 4.9 kOhm for fast input
• Inrush current 40 A
• Insulation Between input and internal logic at 500 V AC Non-insulated between analogue input and internal logic Non-insulated between analogue inputs Between supply and ground at 1500 V AC Between sensor power supply and ground at 500 V AC Between input and ground at 500 V AC Between output and ground at 1500 V AC Between supply and internal logic at 2300 V AC Between sensor power supply and internal logic at 500 V AC Between output and internal logic at 2300 V AC Between Ethernet terminal and internal logic at 500 V AC Between supply and sensor power supply at 2300 V AC
• Integrated connection type USB port with mini B USB 2.0 connector Non isolated serial link serial 1 with RJ45 connector and RS485 interface Non isolated serial link serial 2 with RJ45 connector and RS232/RS485 interface
• Local signalling 1 LED (green) for PWR 1 LED (green) for RUN 1 LED (red) for module error (ERR) 1 LED (green) for SD card access (SD) 1 LED (red) for BAT 1 LED (green) for SL1 1 LED (green) for SL2 1 LED per channel (green) for I/O state
• LSB value 10 mV
• marking CE
• Maximum cable distance between devices Shielded cable: <10 m for fast input Unshielded cable: <30 m for output Unshielded cable: <30 m for digital input Unshielded cable: <1 m for analog input
• Maximum current per output common 6 A at COM 1 7 A at COM 0
• Maximum number of I/O expansion module 4 (local I/O-Architecture) 11 (remote I/O-Architecture)
• Maximum power consumption in VA 46 VA at 100...240 V with max number of I/O expansion module 31 VA at 100...240 V without I/O expansion module
• Maximum size of object areas 512 %KW constant words 512 %M memory bits 255 %C counters 8000 %MW memory words 255 %TM timers
• Mechanical durability 20000000 cycles for relay output
• Memory capacity 256 kB for user application and data RAM with 10000 instructions 256 kB for internal variables RAM
• Minimum load 1 mA at 5 V DC for relay output
• Mounting support Top hat type TH35-15 rail conforming to IEC 60715 Top hat type TH35-7.5 rail conforming to IEC 60715 plate or panel with fixing kit
• Net weight 0.346 kg
• network frequency 50/60 Hz
• Output voltage limits 125 V DC 277 V AC
• Permitted overload on inputs +/- 30 V DC for 5 min (maximum) for analog input +/- 13 V DC (permanent) for analog input
• Power supply output current 0.325 A 5 V for expansion bus 0.12 A 24 V for expansion bus
• Protection type Without protection at 5 A
• Realtime clock With
• Regulation loop Adjustable PID regulator up to 14 simultaneous loops
• Reset time 1 s
• Response time 35 µs turn-off, I2...I5 terminal(s) for input 10 ms turn-on for output 10 ms turn-off for output 5 µs turn-on, I0, I1, I6, I7 terminal(s) for fast input 35 µs turn-on, other terminals terminal(s) for input 5 µs turn-off, I0, I1, I6, I7 terminal(s) for fast input 100 µs turn-off, other terminals terminal(s) for input
• Sensor power supply 24 V DC at 250 mA supplied by the controller
• Supply (serial)serial link supply: 5 V, <200 mA
• Supply voltage limits 85…264 V
• Switching frequency 20 switching operations/minute with maximum load
• Transmission rate 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 15 m for RS485 1.2...115.2 kbit/s (115.2 kbit/s by default) for bus length of 3 m for RS232 480 Mbit/s for USB
• Voltage state 0 guaranteed <= 5 V for input
• Voltage state 1 guaranteed >= 15 V for input
• Width 95 mm

• Environment

• Ambient air temperature for operation -10…55 °C (horizontal installation) -10…35 °C (vertical installation)
• Ambient air temperature for storage -25…70 °C
• Electromagnetic emission Conducted emissions - test level: 79 dBμV/m QP/66 dBμV/m AV ( power lines (AC)) at 0.15…0.5 MHz conforming to IEC 55011 Conducted emissions - test level: 73 dBμV/m QP/60 dBμV/m AV ( power lines (AC)) at 0.5…300 MHz conforming to IEC 55011 Conducted emissions - test level: 120...69 dBµV/m QP ( power lines) at 10…150 kHz conforming to IEC 55011 Conducted emissions - test level: 63 dBμV/m QP ( power lines) at 1.5…30 MHz conforming to IEC 55011 Radiated emissions - test level: 40 dBμV/m QP class A ( 10 m) at 30…230 MHz conforming to IEC 55011 Conducted emissions - test level: 79...63 dBμV/m QP ( power lines) at 150…1500 kHz conforming to IEC 55011 Radiated emissions - test level: 47 dBμV/m QP class A ( 10 m) at 200…1000 MHz conforming to IEC 55011
• Environmental characteristic Ordinary and hazardous location
• Immunity to microbreaks 10 ms
• IP degree of protection IP20 with protective cover in place
• Operating altitude 0...2000 m
• Pollution degree <= 2
• Product certifications RCM ABS LR DNV-GL EAC cULus CE UKCA cULus HazLoc
• Relative humidity 10…95 %, without condensation (in operation) 10…95 %, without condensation (in storage)
• Resistance to conducted disturbances 10 V 0.15...80 MHz conforming to IEC 61000-4-6 3 V 0.1...80 MHz conforming to Marine specification (LR, ABS, DNV, GL) 10 V spot frequency (2, 3, 4, 6.2, 8.2, 12.6, 16.5, 18.8, 22, 25 MHz) conforming to Marine specification (LR, ABS, DNV, GL)
• Resistance to electromagnetic fields 10 V/m 80 MHz...1 GHz conforming to IEC 61000-4-3 3 V/m 1.4 GHz...2 GHz conforming to IEC 61000-4-3 1 V/m 2...2.7 GHz conforming to IEC 61000-4-3
• Resistance to electrostatic discharge 8 kV in air conforming to IEC 61000-4-2 4 kV on contact conforming to IEC 61000-4-2
• Resistance to fast transients 2 kV (power lines) conforming to IEC 61000-4-4 2 kV (relay output) conforming to IEC 61000-4-4 1 kV (I/O) conforming to IEC 61000-4-4 1 kV (Ethernet line) conforming to IEC 61000-4-4 1 kV (serial link) conforming to IEC 61000-4-4
• Resistance to magnetic fields 30 A/m 50/60 Hz conforming to IEC 61000-4-8
• Shock resistance 98 m/s² for 11 ms
• Standards IEC 61131-2 UL 508 CAN/CSA C22.2 No. 213 IACS E10 ANSI/ISA 12-12-01
• Storage altitude 0…3000 m
• Surge withstand 2 kV power lines (AC) common mode conforming to IEC 61000-4-5 2 kV relay output common mode conforming to IEC 61000-4-5 1 kV I/O common mode conforming to IEC 61000-4-5 1 kV shielded cable common mode conforming to IEC 61000-4-5 0.5 kV power lines (DC) differential mode conforming to IEC 61000-4-5 1 kV power lines (AC) differential mode conforming to IEC 61000-4-5 1 kV relay output differential mode conforming to IEC 61000-4-5 0.5 kV power lines (DC) common mode conforming to IEC 61000-4-5
• Vibration resistance 3.5 mm at 5…8.4 Hz on symmetrical rail 3.5 mm at 5…8.4 Hz on panel mounting 1 gn at 8.4…150 Hz on symmetrical rail 1 gn at 8.4…150 Hz on panel mounting

• Packing Units

• Number of Units in Package 1 1
• Number of Units in Package 2 20
• Number of Units in Package 3 240
• Package 1 Height 10.6 cm
• Package 1 Length 13.9 cm
• Package 1 Weight 300.0 g
• Package 1 Width 14.0 cm
• Package 2 Height 30 cm
• Package 2 Length 60 cm
• Package 2 Weight 6.983 kg
• Package 2 Width 40 cm
• Package 3 Height 105.0 cm
• Package 3 Length 80.0 cm
• Package 3 Weight 162 kg
• Package 3 Width 120.0 cm
• Unit Type of Package 1 PCE
• Unit Type of Package 2 S04
• Unit Type of Package 3 P12